Mosaic Palette 2.0 to Standard PTFE adapter

you will need to print one Knurled nut and one adapter.
Both print without support - adapter has some sacrificial bridging to remove with a small blade.

thread a standard PC4 M10 fitting into one end, knurled nut goes over tube using provided Oring
makes connecting a P2 to any printer with a PTFE inlet connection (BMG, MK3, Hemera etc etc)
was printed at a 0.16mm layer for strength/fidelity.

Any questions please contact me Via twitter @mad_monkey01

Print instructions

Print for max strength based on your preferred layers/printer