Drill adapter for pineapple coring auger

Tired of manually twisting out the insides of a pineapple?
Wish there was a better way?

Now there is!

For one simple print, you can adapt your metal coring auger to work with any cordless drill with a 1/4" hex key!*

*Knife not included for chopping off the top of the pineapple. Drill not included. Not responsible for excessive expenditures on pineapple or maniacal cackling when drilling through pineapple.

On a more serious note. The included model was designed to be as parametric as I could make it. You shouldn't need to adjust many parameters to make it fit your auger. Those that you do should be well labeled. If you have any questions please ask.

STEP & f3d files have been included so any modification can be made easily.

Print instructions

Print with standard 10%-40% infill.
Recommended 5 perimeters.

It doesn't undergo a ton of stress, but it's better to have added margin when operating with a drill and sharp objects.

The Enhanced Key STL has a flared base and a hole designed to accept M3 screws. This must be printed on its side in order to optimize strength. Otherwise the forces of cutting the pineapple may shear off the key.