Pleating Fork 1/2" Pleats, rounded, tapered, poker, ruler

Locked at home? Sew some masks! But pinning those pleats is very time cosuming. This pleating fork will speed up your process. Just put your edge in between the tines and twist. Slightly rounded to reduce pressure on the hand. Per sewist feedback, this fork is tampered and includes a corner poker and 0.5 inch graduated ruler. The Swiss Army Knife of pleating forks!

Print instructions

For quickest/still strong printing of multiple copies (on PrusaSlicer 2.2.0):

Be sure to do a Z calibration and make sure your first layer is correctly calibrated:
https://help.prusa3d.com/en/article/first-layer-calibration_112364/

Print 10 instances, parallel to x-axis.

Print settings
Layers and perimeters
Perimeters: 2
Solid layers, Top: 3

Infill
Fill density: 10%
Fill pattern: Cubic

Speed
Perimeters: 100 mm/s
Small perimeters: 50 mm/s
External perimeters: 70 mm/s
Infill: 250 mm/s
Solid infill: 250 mm/s
Top solid infill: 100 mm/s
Gap fill: 0 mm/s (disable)