Dancing Coffin Dudes

Dancing Coffin Dudes toy, not responsible for Astronomia ear worm.

Print instructions

Case-Base.stl, need (1)
Case-Cover.stl, need (1)
Coffin.stl, need (1)
Dude-Body-with-Left-Peg.stl, need (3)
Dude-Body-with-Right-Peg.stl, need (3)
Dude-Hat.stl, need (6)
Dude-Head.stl, need (6)
Dude-Shirt-Insert.stl, need (6)
Dude-Sunglasses.stl, need (6)
Mechanism-Drag-Link.stl, need (2)
Mechanism-Front-Back.stl, need (1)
Mechanism-Left-Right.stl, need (1)
Mechanism-Lever.stl, need (4)
Mechanism-Spur.stl, need (2)

Hardware
M2.5 x 8mm, need (10)

Prep:
This was never intended to end up online, the parts are hastily thrown together, with no built-in tolerances, therefore parts will need trimming & sanding prior to assembly - and probably even more during so, too.

Installation:
1.) Start with the case, drop-in Mechanism-Left-Right
2.) Drop-in Mechanism-Front-Back
3.) Install 4x Levers, 2x Spur gears, & 2x Drag Links
4.) Secure with 6x M2.5 x 8mm screws
5.) Install Cover, with 4x M2.5 x 8mm screws
6.) Assemble the Dudes and install them to the base
7.) Cap it off with the coffin. No glue here, just push-fit