DtM-v3.0 Face Shield PPE for COVID-19

Remix of Prusa RC2

Print instructions

3d-printed headband in PLA, roughly 50g/1.75oz per part.

Outer envelope of 3d-printed headband is 191mm wide, 148.5mm long, and 52.5mm tall.

Print time is roughly 3h15m per part on a Prusa i3 MK2S and a Lulzbot Taz 6 at 0.25mm layers, 30% infill, no supports.

PREFERRED PRINT SETTINGS:
Nozzle Diameter: 0.4mm
Programmed Extrusion Width: 0.5mm
Layer Height: 0.3mm
Shells: 3 (which results in a 1.5mm wall)
Infill: 30%
Infill Type: Grid
Solid Bottom Layers: 3 (which results in a 0.9mm thick bottom)
Solid Top Layers: 3 (which results in a 0.9mm thick top)