Soap Capsule

Please note if you print this and successfully embedded soap, the amount of soap that you embed is up to yourself

Soap Capsule contains 2 ml of Soap and it can be capped off very easily to dispense the soap!!

You can carry this part anywhere which will reduce your contact with public hygiene devices and you can use it for emergency washing needs!

3D printed part will be disposable.
I currently don't have a water-soluble filament to print this with :(
As soon as I get that, I will give it a shot!

NOTE: THE LINE OF PAUSE IS WHERE CAP WILL BE DE-ATTACHED. DO NOT PUSH IF THE CAP IS NOT OPENING UP! PART WILL BE CRUSHED!

Print instructions

Please print with the following settings attached as a picture

Make sure to print with Brim

Operation instructions:

1. Print only one at a time ( at least for now, if you were able to print more and have the cap function, please let me know as well)
2. Pause the print before 4 minutes remaining (~16.8 mm Z height)
3. Deposit the soap
4. Continue the print

G Code is uploaded