Raspberry Pi Aluminium Case Mounting Bracket For Lack Enclosure

This mounting bracket is for the rpi4 aluminium heatsink case and screws to the 50mm Ikea Lack Table legs / Lack Enclosure.

Modified for screws (4.8mm dia thread, 4.5mm head depth)
Modified for M3 hex nuts for the cover

Credit to Glowen for the original design that mounts to the Prusa i3 Printer

I used:
2x Wood Screws
2x M3 x 12mm Screws
2x M3 Hex Nuts

Print instructions

Layer Height - 0.1-0.2mm
Wall Thickness - 2 Walls
Infill - 10-15%

This took approximately 3-1/2 hours to print on a MK3/S in PETG