Dowel, nuts and bolts for Minifig TP Holder

This is all the nuts, bolts and dowels (Sleeves) required for the Minifig TP Holder found here:

http://www.thingiverse.com/thing:1277045

Edit: 12 June 2017

Experience has taught me the following:

1. Use the 140 mm long sleeve I have just uploaded. 145 mm is slightly too long. Print this at 1.01 times the size of the .STL here
2. Use the 45 mm long bolts and size/print them at 0.99 times the size of the .STL files here

3. If at all possible, use PETG or ABS for the 45 mm bolts as thy need more strength than PLA prints
   I leave all the other files here in case anyone wants to use them instead.

   Enjoy.

   All created as customised versions of Nut Job

   http://www.thingiverse.com/thing:193647

Print instructions

Category: Bathroom Print Settings

Printer: Velleman K8200

Rafts: No

Supports: No