Alejandro

Alejandro is a friend from RCT. It is 308 mm long x 64 mm high x 20 mm deep. The name is made using SketchUp but it is too long for my Prusa i3 MK3 bed. So I used Microsoft's 3D Builder to subtract a small notch between the 'a' and the 'n' from the back. Then I used Prusa Slicer's Cut feature to separate the model in two pieces. After they were printed, I glued the notch in place with gel cyanoacrylate.

Print instructions

No rafts / no supports

0.3 mm resolution at 15% infill
AMZ3D PLA green

It is all the same material but the photos come out differently due to the lighting and automatic settings.

I have included the whole 'Alejandro' and the two pieces 'Aleja' and 'ndro' as stl files.