Magnet switch for fridge note: no glue

A "NO or ON" fridge magnet switch.
For those who want to combine magnets and 3D print, this is a perfect project.

The idea is originally from
https://www.thingiverse.com/thing:1653924
although I create my own geometry.

I also play around with NO and ON, so that either direction is the right direction. Switch up, you will have NO and note falls; switch down, you get ON and note stay.

Most importantly, I measure and calculate the angles for that two slopes, which are 6.84°.
This angle is extremely important for those who want to creat their own magnet slots.
You simply place the NO and ON face down, create two magnet holes (TinkerCAD), and rotate 6.84° and the magnets will be parallel with the slope which gives you a perfect magnet holes.

I use 8X3 mm button magnet, and I design the holes as 8.06X3.10 mm for tight fitting.
So NO GLUE!!!!
In my printing, I mistakenly design the magnet as 8.06X2.80 mm, but I correct the STL file

Enjoy the printing.

Print instructions

Category: Kitchen & Dining