Competition Pro Remake Using Arcade Parts
Competition Pro Remake Using Arcade Parts
3D
Published 2022-04-04T08:24:47+00:00
The Competition Pro is a legendary joystick from the early 80s created by Kempston Micro Electronics, the same company that produced the Kempston interface for my beloved ZX Spectrum.
Here is my retro remake of this awesome 80s waggle stick using arcade parts to power the internals.
The main body parts click together quite tightly, so make sure to screw your Sanwa clone
joystick into the housing first.
_4410H means: 4 top layers, 4 bottom layers, 10% infill and H is Hex infill.
_4415H means: 4 top layers, 4 bottom layers, 15% infill and H is Hex infill.
Joy_QSCP_JSTop_4410H is built for a stem/shaft of 37 x 9mm (not inc. screw top)
As there are numerous Sanwa clones of various stem/shaft sizes I have included the STL file for the joystick top so that you can fine tune it to your parts.
THE STL FILES FOR THIS DESIGN ARE AVAILABLE THROUGH MY PATREON & PATREON SHOP.
patreon.com/3DFreeman
You could join up for a month and download the STL files for all my designs or you can now buy bundles from my Patreon shop for $3
Here's a non-affiliate ebay link to the type of cheap and cheerful Sanwa clone I use:
https://www.ebay.com.au/itm/334119951114?hash=item4dcb19db0a:g:Ka0AAOSwaqxhHjfn&frcectupt=true
Print Settings
Printer:
Aquila X2
Rafts:
No
Supports:
No
Filament brand:
Voxelab
Filament material:
PLA
Notes:
I would like to take this opportunity to give a shout out to Mikko Leskinen:
https://www.thingiverse.com/kaji_fi/designs
His Competition Pro remake is one of the first things I 3D printed and can be found here:
https://www.thingiverse.com/thing:918504
My design is not a remix of this, I made mine from scratch in Blender but his work was definitely an inspiration.
| Date published | 04/04/2022 |
| Support Free | YES |