X-Axis Belt Tensioner - Voxelab Aquila
This object is currently under review. We cannot guarantee its printability just yet but this object is shareable and people with this link will be able to see and download it. If you would like to help us guarantee the printability of this object, please upload a picture of it printed.
X-Axis Belt Tensioner - Voxelab Aquila
Replacement X-Axis belt tensioner designed for Voxelab Aquila printer. Designed to use stock parts only. Fits into the end of the 2020 extrusion and secures with an M5x14 pan head screw, two of which come with the stock tensioner. Pulley is the same as the stock one so you simply swap it into the new one. The flanged bearings are F634 bearings if you need replacements. They are held in by the same M4x18 flat head screw which the original uses.
Print all parts at the standard orientation.
I used 0.2mm layer height
20% gyroid infill
3 walls
You can print them on a raft if you have issues with fitment.
I plan to make other versions to allow it to fit any printer with 2020 extrusions or other pulleys in the future.
0.2mm layer height
20% gyroid infill
3 walls
Status | Under Review |