OpenRC F1 DRS system
3,299
views
154
downloads
1
collection
0 comments
Loading comments...
OpenRC F1 DRS system
3D
Published 2021-10-19T16:44:57+00:00
20
0
Add to Collection
Description
I designed a DRS system for the OpenRC-F1 a few years back.
Recently someone asked me about it and I decided to upload it here.
I tried to keep modifications to the minimum. I modified the rear wing and added a pin and an extra diffuser. You still need the original diffuser as mine only serves as a servo holder. You’ll need a radio system with 3 channels (throttle, steering and DRS).
All print with no supports!
You’ll need:
- DRS_rear_wing.stl
- DRS_wing.stl
- DRS_pin.stl
- DRS_diffusser.stl
- 3 x M3x12mm screws and nuts
- 1 x micro servo sg90 or similar
Instructions (see pictures); it is not difficult to assemble but it’s better if you follow this order:
- First attach the pin to your servo with one of the servo’s screw
- Then put the servo in the servo holder using another servo screw
- Now you can screw the wing structure (without the moving wing) to the car
- Then attach the moving wing to the pin with a 3mm screw and nut
- Now gently force the moving wing into the wing structure holes
- Finally mount the original diffuser with the other two 3mm screws
Video: https://youtu.be/wcOxkoGnHrM
Isn’t this awesome? A 3D printed F1 car with working DRS system!!
Hope you like it!
Technical Information
Date published | 19/10/2021 |
Support Free | YES |
More Information
Object Parts