EDC 4mm Hex Bit Driver
2,679
views
84
downloads
2
collections
0 comments
Loading comments...
EDC 4mm Hex Bit Driver
3D
Published 2021-06-21T09:05:26+00:00
11
0
Add to Collection
Description
This EDC Tool uses the driver extension from an Original iFixit 54 Piece Bit Driver Kit. It uses 6mm x 1mm magnets to hold the bit in place on the side. This tool accomidates 8 of the bits from the iFixit Kit. You'll need a stack of 7 magnets for each of the 8 holes. You'll also need 6x M3x10 screws and 6x M3 Nuts.
The magnets firmly hold the bits in place. Position of the magnets kind of draw the bits to the side as the magnets try to get a better hold of the hex side of the bits.
Easily carried in your pocket or on your keys.
License
Printing Details
0.2mm layer height
20% Infill
4 Perimeters
6 bottom and top solid layers
Supports are required
Requires 6x M3x10 screws and 6x M3 Nuts
Technical Information
Date published | 21/06/2021 |
Time to do | 1 - 2 minutes |
Dimensions | 72mmX35mmX13mm |
More Information
Object Parts