Monado Figurine
This object is currently under review. We cannot guarantee its printability just yet but this object is shareable and people with this link will be able to see and download it. If you would like to help us guarantee the printability of this object, please upload a picture of it printed.
Monado Figurine
Monado from the Xenoblade Chronicles Series.
1:6 Scale (total length is 23cm).
Other materials needed:
- 1x M3 Button Head screws (any length from 10mm to 20mm)
- 4x 12mm diameter x 2mm thick neodymium magnets.
Preferably printed with a multimaterial unit, but it is very doable with a manual filament change, which was how I made it with. 0.2mm resolution only requires 4 filament changes.
Printed in 2 halves with a magnet hole. Magnets used are 4 pieces of 12mm diameter x 2mm height neodymium magnets. 3 are stacked and inserted on the magnet hole, 1 is inserted into the stand. The 2 halves of the monado is then super glued together.
I printed mine with SUNLU Red Silk PLA and SUNLU Luminous Blue PLA.
Filament: Red PLA, preferably Silk PLA for the metallic look and light blue PLA for the glowng part.
Resolution: 0.2mm
Infill: Grid, 25%
Perimeter: 3
No Support, No Brim
Status | Under Review |
Time to do | 200 - 230 minutes |
Material Quantity | 40 |
Dimensions | 230mm x 50mm x 10mm |
Support Free | YES |