Sanwa JLF TP-8YT-SK Bullet Top with Thread

Designed based on the Seimitsu LSX-NOBI-01-STD lever top, threaded for Sanwa JLF TP-8YT-SK.

Ever wanted to try a different top on your Sanwa lever, but don't want to pay for shipping since you're unsure if you'd like it? Try printing this first!

The thread works great with my Sanwa JLF TP-8YT-SK lever. Due to the nature of the material, these won't hold up of you ride the gate a lot when you play (or if you rage and abuse the stick a lot.). For standard play, these should hold up nicely.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

Yes

Supports:

Yes

Resolution:

0.2mm

Infill:

40

Filament: eSun PLA+ White

Notes:

PRE-REQUISITE FOR EXACT PRINT SETTINGS:

* Install the "Custom Supports" version 0.1.0 mod by Krasimir Stefanov on the Cura Marketplace. * The Cura version used for this print of mine is version 4.10.0

Printer model: Ender 3 V2

Filament: eSun PLA+

Filament Color: Fire Engine Red

Layer Height: 0.2mm

Initial Layer Height: 0.2mm

Line Width: 0.4mm

Wall Thickness: 0.8mm (lighter duty)

OR

Wall Line Count: 8 (heavier duty)

Top/Bottom Thickness: 0.8mm

Top Thickness: 0.8mm

Top Layers: 4

Bottom Thickness: 0.8mm

Bottom Layers: 4

Enable Ironing: YES

Infill Density: 40%

Infill Pattern: Zig Zag

Printing Temperature: 205C

Printing Temperature Initial Layer: 205C

Build Plate Temperature: 60C

Build Plate Temperature Initial Layer: 60C

Flow: 100%

Initial Layer Flow: 100%

Printer Speed: 72 mm/s

Infill Speed: 72 mm/s

Outer Wall Speed: 36 mm/s

Inner Wall Speed: 55 mm/s

Top/Bottom Speed: 55 mm/s

Support Speed: 36 mm/s

Travel Speed: 180 mm/s

Initial Layer Speed: 20 mm/s

Enable Retraction: YES

Retraction Distance: 6.0 mm

Retraction Speed 45 mm/s

Enable Print Cooling: YES

Fan Speed: 100%

Generate Support: NO (I use a plugin called "Custom Supports" by Krasimir Stefanov, available on the Cura Marketplace. Please research on how to use that beforehand.)

Support Pattern: Grid

Support Density: 40%

Enable Support Brim: YES

Enable Support Interface: YES

Build Plate Adhesion Type: Raft

Raft Extra Margin: 15 mm

Raft Smoothing: 5mm

Raft Air Gap: 0.3mm

Raft Top Layers 2

Raft Top Layer Thickness: 0.2mm

Raft Top Line Width: 0.4mm

Raft Top Spacing: 0.4mm

Raft Middle Thickness: 0.3mm

Raft Middle Line Width: 0.8mm

Raft Middle Spacing 1.0mm

Raft Base Thickness: 0.24mm

Raft Base Line Width: 0.8mm

Raft Print Speed: 36.0mm

Category: Video Games