Cetus Z-axis endstop holder

This is a recreation of the Cetus Mk2 standard Z-axis endstop holder. When mine broke, I searched online and found a set of files for most of the printed parts on the cetus, including this piece - except it's wrong. I printed the version in that file, and it's about 15mm too short in some critical dimensions. That's right, fifteen millimeters.

So, I imported that STL into Fusion, and essentially traced it for the beasic outline and shape, and used measurements taken from my original broken endstop to fill in the incorrect dimensions.

Here's a link to my Fusion model: https://a360.co/2v5vOte I hereby place it under the same Creative Commons - Attribution - Non-Commercial - Share-alike license as the STL.

Print Settings

Printer:

Cetus MkII Standard

Rafts:

No

Supports:

Yes

Resolution:

0.25mm

Infill:

25% gyroid

Filament:

Translucent

Notes:

Printed on a heated bed with a Garolite LE surface at 250C. Supports were generated on build plate only, and a 10mm brim was used.