Mount for BTT SFS V1.0 Smart Filament Sensor
Mount for BTT SFS V1.0 Smart Filament Sensor
3D
Published 2020-11-20T05:15:25+00:00
This is a simple mount/holder for the BigTreeTech BIQU Smart Sensor filament.
You will need 2xM3 Countersunk Machine Screws.
I design it to be mounted on my aluminum frame 20 × 20 with T-nut or sliding T-nuts.
The 2 “arms” that are going to top of the sensor aren't really useful.The shell is 2 mm thick, and it’s too much. I've removed arms in an other version with a thiner 1.5 mm shell. (included)
I’ve included all my conception files (fusion360) and step files.
It’s based on the reality (V2 of the sensor) because officials github stl files of the sensor aren't the same size as the real thing. https://github.com/bigtreetech/smart-filament-detection-module
Print with no support at all nor raft, nor brim nor skirt (except to purge purpose)
Strongest part with 0.10 mm to 0.20 mm layer height
I strongly suggest using 3MF files instead of stl or obj.
Good prints ! Show me your mount please !
Printed on: Artillery Sidewinder X1
- Rafts: No
- Supports: No
- Resolution: 0.16
- Infill: 20%
- Filament brand: Prusament PLA
- Filament color: Galaxy Black
- Filament material: PLA
2 shells will be more than enough
6 Layers Bottom 7 Layers TOP
Everyt settings should be included with the 3mf file.
| Date published | 20/11/2020 |
| Support Free | YES |