Doorcloser Türschließer

Edit: Please be aware I mixed up the names fpr the left and right variants of the files, I will remove this text once I uploaded the files with the right name.

For some time now I wanted a non invasive doorcloser. I finaly got arround to designing one after I was not able to find what I was looking for.

The Doorcloser consists of 3 parts, a Frame part and a door part which clip onto the hinge and a Spring which slides into the other two parts

I hope my design will help some of you saving on heating or maybe AC costs.

I successfully tested the 1mm spring, 2mm was too strong for the current version of the holders

The files come with the "door" and "frame" file for the hinge on the left or right side, you need one for each hinge.

When you stand in front of the door and it swings towards you, if your hinge is on the left side use the "L" files, if the hinge is on the right side use the "R" files.

At the moment it will not fully close the door but only lean it to the frame, I am going to try solve this with a different spring design soon.

Print Settings

Rafts:

No

Supports: 

No

Notes:

Rotate the "door" and the "frame" part so you dont need supports, use a brim to make sure your printer does not knock the parts over

Category: Household