DanAnd's Mount for E3D Revo Micro, Sherpa-Mini, Creality Ender3, CR10 or Sunlu S8. Bowden-Setup and Direct-Extruder possible

• Mounting a E3D Revo Micro on Creality Ender 3, CR10, Sunlu S8 and many more printers.
   
• Bowden-Setup and Direct-Extruder with Annex Engineering Sherpa Mini !  
   
• Silent Setup with 5015 Blower and 40x40 axial Fans. 
   
• Detailed build instruction and Bill of Material in attached PDF Document! 
   
• Over 1,5 years of usage and evolution as this design started with the Beta Phase of the E3D Revo Micro 

Looking for additional printers and testers! I want to expand the list of compatible printers. 

Release Notes: 

• Uploaded STEP and Fusion 360 Archive for your own modification needs. Please be aware that this is a complicated fusion file, as I included all variants inside one fusion 360 file, to work with the non-commercial fusion version. 

0.2a 

• optimized part- and hotend-cooler for better printability, more height and space from the nozzle. It is possible to exchange the revo nozzle without removing any part cooler. 
• Running “in production” for 6 months.  

0.1a 

• Slight change on the diameter of the screw holes of the hotend cooler to a more firmly connection of the Sherpa Mini. 
• Removed one fan shroud blade to ease up cable ties at the hotend cooler exhaust. 
• Enhanced printability of the part cooler. Reduced shrouds and optimization for slicers (mostly bridge issues with PETG and ASA) 
• Added additional mounting holes for the Sherpa Mini (Creality Adapter Plate)

0.1 

• Initial Release