3D Models 3D PrintersPrusa Parts & Upgrades

MK3S LCD Cover with Waveshare 7HP-CAPQLED display

0 reviews
MK3S+ LCD Cover with an additional Waveshare 7HP-CAPQLED display
15
57
0
1125
updated November 27, 2023

Description

PDF
Model info

MK3S+ LCD Cover with an additional Waveshare 7HP-CAPQLED display

Needs 5x 8mm M3 screws (in addition to the screws and nuts used for the original cover).

Fits these cables:

I included both split model with dovetail joint that fits onto MK3S+ bed, and the full model. To assemble the split version, put one part on top of the other and push them together until they lie flat. (You can add some superglue, but I didn't find that necessary.)

PETG, 0.2mm layers, 20% grid infill, supports are only needed for the dovetail joint

Notes

The display extends below the original printer feet so you'll need to set the printer on something like a concrete tile to raise it.

To connect HDMI and USB to the RPi, I recommend using my Einsy Base remix for better access.

I’m using my fork of OctoScreen that works with PrusaLink.

Czechia-based shopping list

 

Model origin

The author remixed this model.

i3 MK3S+ printable parts
 by Prusa Research
 

Differences of the remix compared to the original

Added a 7-inch touchscreen

License