Soap holder (22mm pole, holes outside)

Soap holder for 22mm pole. There are two different mounting styles for this model: with the mounting holes visible on the back (this one) and with a clean back and the holes visible from the soap side (https://www.printables.com/model/162752). 

Required:

• 2x M3 threaded insert (I used M3x5.7x4.6 from https://www.amazon.de/dp/B08PV3R86P)
• 2x M3x(14-18)mm screw (with a flat side under the head and a head diameter of ≤ 6mm)

Printing: 

• Can be printed without supports. 

Post-processing:

• Optional: Cover with epoxy resin (or similar) to smooth out the layer lines.