Simple Soldering Tin Holder with magnets

This is pretty simple tin holder with two large 12x6 magnets. Hole dimensions are 12.1mm and 6.05mm so my magnets fitted fine and printing over them worked also ok. Remember to wipe them with IPA after inserting. Print pauses at layer 58.

After the print, join parts with or without glue, because after hammering them together, they aren't going to separate without breaking.

I used default 0.15mm QUALITY-settings with “Support on build plate only” -option on. No need for brim. Don't use support for everything, because it fills magnet-holes.

Happy printing.