The Holy Mushroom

Behold the Holy Mushroom! This is the result of being stuck in a 3-hour webinar on a topic that has nothing to do with my job. I was feeling creative, and a bit artsy, so I started playing around with the form tool in Fusion 360. The result is a mushroom full of holes, much like my knowledge gained from this boring webinar. 

If you print this, please share your results as I would love to see how it turned out. Bonus points for using a silk PLA in a rainbow gradient color! For best results print upside down with “Snug” supports as seen in the image from Prusa Slicer. 

Remix Culture Approved! - To aid in remixes from the community I have added the design files in all of the relevant formats for you to download. 

Design File Included: .stl .f3d, .ipt, step, .skp and obj files. 

*Note: This post contains Amazon Affiliate links that support The Makers Workbench via a small commission from any sales they help generate.

Follow The Makers Workbench on:

• Instagram
• YouTube 
• Rumble
• Locals
• GAB
• Gettr
• Odysee
• Paypal.me
• Patreon
• TheMakersWorkbench.com

Print Settings

I have only tested this model using the default 0.35mm Fast preset in Prusa Slic3r 2.4.1 with the following amendments made.

• 3-perimeters
• 4-top layers
• 4-bottom layers
• 20% infill
• Rectilinear Infill
• Monotonic Top and Bottom Pattern

Support Settings - Note: See image for proper printing orientation

• Overhang Threshold - 55 degrees
• Style - Snug
• Top Contact Z-Distance - 0.3mm
• Pattern Spacing - 4mm
• Top Interface Layers - 4
• Interface Pattern Spacing - 0.4mm

PLA Used: Polymaker PLA - https://amzn.to/3uF9Soo