Sapphire Plus Static ABL Probe Mount by ideagen3D

Mount for 12 mm diameter static ABL probes (capacitive & inductive) for the TwoTrees Sapphire Plus (and likely S). Uses OEM mounting points and bolts (M2.5 or M3).

If your probes came with washers, those may not fit, just exclude them from installation.

Install at 3mm above the nozzle initially, fine tune after installation complete (including firmware).

Offset not validated, but should be in this ballpark.

Please let me know if you find the exact offsets.

define NOZZLE_TO_PROBE_OFFSET { 0, -48, 0 }