Binary Coaster

A quick and simple coaster with binary in it.

Dimensions:

4 inch diameter (10.16 cm)

.25 inch thickness (0.635 cm)

.125 inch depth (0.3175 cm)

Print settings:

The back is blank, so print with that face facing build plate.

No supports

25% infill (feel free to chose your own)

Any layer height, but I'd recommend .2 mm.

Use whatever speed you normally use. (I normally use 55 mm/s)

Feel free to change any settings for any reason.

The attached pre-sliced file is sliced with .2 layer height, .4 nozzle, 55mm/s speed 20% infill, infill pattern “triangles” and bed temp of 65C and nozzle of 200C. (Sliced for ender 3 with CR touch w/ cura)