FRC Logo Keychain

Please note that the STL has a diameter of 4 inches, while the GCode is scaled to 25%, so it has a diameter of 1 inch.

A little keychain with the First Robotics logo on it.

Dimensions:

4 inch diameter (10.16 cm)

.25 inch thickness (0.635 cm)

.125 inch depth (0.3175 cm)

The hole for a chain has a diameter of .5 inches (1.27cm)

Print settings:

The back is blank, so print with that face facing build plate.

No supports

25% infill (feel free to chose your own)

Any layer height, but I'd recommend .12 mm.

Use whatever speed you normally use. (I normally use 55 mm/s)

Feel free to change any settings for any reason.

The attached pre-sliced file is sliced with .05 layer height, .4 nozzle, 55mm/s speed 15% infill, infill pattern “triangles” and bed temp of 65C and nozzle of 200C. (Sliced for Ender 3)