Postcard Frame

This is a simple post card frame that can be mounted to the wall using flat thumb tacks or small finishing nails. It fits postcards that are about 179mm long by 118mm tall.

There is a sacrificial base that is .3mm thick. Print with the base on your build platform and then remove with flush cuts or a hobby knife after printing.

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Supports:

Doesn't Matter

Resolution: 

0.2

If you'd like you can buy me a coffee here: https://www.buymeacoffee.com/junrenman