Monoprice Mini Delta Extruder Hose Guide Screw Mount

V3 - Fixes the placement of the screw. it was offset previously and caused issues.

From original

On the Monoprice Mini Delta the feed hose going to the extruder tends to get caught in the motors on occasion. This causes some very bad noises and prevents the extruder from reaching its home position at the end of the print. This clip helps guide the hose back into the proper position to prevent this from happening.

The original snapped into place and it wasn't the easiest thing in the world. There's a screw on the right side, so let's use it!

This is better than the version I made from scratch, which sometimes missed the cable bundle.