DIY All-Around Silicone Sock for E3D Revo

Make your own DIY all-around silicone sock for Revo nozzles.

NOTE: ONLY USE SUITABLE, HIGH-TEMPERATURE SILICONE!

Variant 1: Two-Part Silicone

Pour the bottom of the mold ⅔ full with silicone (~0.5ml) and screw it together until the silicone comes out of the top holes.

Varian 2: High-Temperature Silicone sealant

Soak the mold in detergent water. Fill the lower part of the mold ⅔ with silicone, screw together and let it settle in a warm place for 24h minimum. After de-molding let it cure for another 24h.

Update 2022/03/25: Increased the size of the vent holes. Added the STP files.