eMaker Huxley Y-axis belt tensioner

derivative of chrille's belt tensioner to fit the eMaker Huxley.

Hole pitch 16mm and belt-clamp for T2.5 timing belts.

It should also work on the reprappro Huxley

Instructions

Replace your standard Y-axis belt clamp with this adjustable version. I used two 25mm M3 bolts for mounting.

While i eventually managed to get it replaced without removing the bed i strongly recommend to do so ;)

Parts needed:

3x M3 nut

2x M3 25mm screw

1x M3 12mm screw or longer