east3d gecko-mk3-e3d-hybrid part cooler ((UPDATED))

This is a new Hybrid prusa mk3-e3d-remix part cooler for the east3D gecko coreXY.

will work with titan extruders and e3d v6 setups.

(this is the new prusa mk3 part cooling nozzle from prusa3d.com - slightly modified by me. )

Mounting the nozzle.-- you will need 2 m3x6mm screws or 5mm should work.

((( UPDATED)))

added a no name version.

added a !hot! version.

Now nozzle air direction walls are a bit thicker(easier to print)

added a 0.2mm thickness to the outer body wall behind the blower fan. (helps with thin wall for the bottom screw)