Basement Water Pump Filter Plate Replacement - Model WRSC-6
Basement Water Pump Filter Plate Replacement - Model WRSC-6
Published 2020-04-25T16:40:35+00:00
Lid plate for Model WRSC-6, 9.0A 1 Phase, 115 V ~ 60Hz water pump for use in basements.
My pump is very old and I've never cleaned it out. I removed the plate that holds the filter and the entire thing began to disintegrate as soon as I tried to wash it. This plate matches the dimensions of the lid almost perfectly. A little wiggle room was given with the screw diameter based on printer tolerances. You'll need to use an O-Ring around the inner piece to truely make it water tight. Tested several times with medium and hot water using PLA, although I will probably re-print with ABS to ensure high water temperatures will not deform the material.
Printed using a Printrbot Simple Metal for inital testing.
No Ahdesion or support necessary.
Quality was 0.2mm
Speed was around 50mm/sec
Infill Density: 40%
Increased shell thickness to 1.0mm to ensure enough layers to be water-tight.
Date published | 25/04/2020 |
Time to do | 150 - 151 minutes |
Material Quantity | 50g |
Dimensions | 87.5x111.5x13.3mm |
Support Free | YES |