Face Mask
Face Mask
Published 2020-04-20T20:55:28+00:00
So lets make this CLEAR, I make NO claim that this mask will protect you from ANY VIRUS !!!
Print with 3 walls minimum it is designed to 2.4 mm that's on a 0.4 nozzle.
I printed in PLA, but use your best knowledge of what material is the best.
Filters are to be cut to size there are no standard ones that fit, plenty space to put even some activated carbon if available, not tested (aquatic pet shops do lose carbon)as a tip, also apparently the vacuum cleaner bags are quite effective material, these are only speculation not facts!!!
Update 30.03.20 uploaded S3D TPU profile and reference pictures to settings, Main Body TPU, working on the rest printing and redesigning a bit video to follow
https://www.youtube.com/watch?v=kp-jDaM-tnQ
https://www.facebook.com/Lazz3DIY/videos/210569126819585/
Date published | 20/04/2020 |
I really like the design, so I felt bad that no one commented on it yet. Printed it twice, once at a hundred percent, which was too small to fit my rather big face. Printed it again at 117% and it fits great. My only complaint is that the thread is not the same on both sides. Had to print the filter parts 4 times. Because I printed it wrong the first time and the second time I screwed it too tight and wasn't able open it without breaking.