Fire Extinguisher Mounting - 10 lb, 4.5" dia, (115mm)
1,730
views
63
downloads
0 comments
Loading comments...
Fire Extinguisher Mounting - 10 lb, 4.5" dia, (115mm)
3D
Published 2020-03-12T09:25:16+00:00
2
0
Add to Collection
Description
Mounting for 10lb or 4.5" diameter fire extinguishers.
The extinguisher snaps into the top clip and rests on the base.
License
Printing Details
Print the bottom fairly solid near the wall as that is what is doing most of the work. I think i used 30 to 40% triangle infill.
The top clip part should be printed with enough perimeters to be solid on the clips. The infill can be 10 to 15%
I printed both parts with .8mm lines and .32 layers to get it done reasonably fast. I did this with a .4 nozzle.
I printed some with petg and pla. I liked pla better for the top part as the extinguisher snapped in place more securely, but petg is fine. It isn't going anywhere on its own either way.
Technical Information
Date published | 12/03/2020 |
Support Free | YES |
More Information
Object Parts