LINKAGE MACHINE TinkerMechanical
This object has been checked for printability, but did not pass the test and was deemed not printable. This object is still shareable and people with this link will be able to see and download the object, so please make sure you watch out and progress with care!
×LINKAGE MACHINE TinkerMechanical
This object was made in Tinkercad. https://www.tinkercad.com/things/kkKce2LKJEZ
This is a linkage hand powered demonstration system that can be printed entirely support free. The design is intended to use printer tolerance so that the 3mm holes are suitable for a thread to cut into, instead of go through. There are 3 types of linkage within the design which are all powered by the same master gear. I have attached an image of which bolts where the bolts should go to attach the design. Ideally use m3 for low tolerance printers or m3.5 for very high tolerance printers.
This design is mainly intended as an educational demonstration.
All pivots / rotation points consist of 3mm hole for bolt to screw into and 3.5mm hole to turn around the bolt
M3 or 3.5 x 6mm x10
M3 or 3.5 x 4mm x4
PLEASE LET ME KNOW ABOUT ANY IMPROVEMENTS YOU CAN COME UP WITH
No supports :)
Printer bed needs to be 170mm x 170mm if you want to print base whole alternatively just split it into parts and glue together.
Status | Rejected |
Dimensions | 170 x 170 x 5 |
Support Free | YES |