Replacement Igloo Cooler Handle for 25-72 qt coolers
Replacement Igloo Cooler Handle for 25-72 qt coolers
Published 2019-09-03T17:27:12+00:00
This is a replacement handle for 25-72qt IGLOO coolers. The part number is #00021023, and link to the original part is here:
This part does require additional hardware to complete the assembly. There are both metric and standard versions of the handle. The hardware size can either be M6(Metric) or 1/4-20(SAE). The Hardware requirements are:
- 2x hex nut
- 2x round or socket head bolt between 3/4"-1" (20mm-25mm)
To complete the assembly the following parts are required:
- 2x Igloo cooler handle arms
- 1x Igloo cooler handle mount
- 1x Igloo Cooler handle in either Metric or SAE depending on the hardware used
- Screws that were originally used to mount the handle to the cooler.
The new handle is not compatible with the original mount so a new 3d printed mount is required. Future versions of this part might be compatible with the original mount.
The handle has built-in support for both directions of orientation to make it easier to orient. This support can be drilled out once the part has completed.
Date published | 03/09/2019 |
Support Free | YES |