Creality Ender 3 BMG + E3D Volcano Mount
Creality Ender 3 BMG + E3D Volcano Mount
Published 2019-08-29T16:27:00+00:00
Extruder.
Extruder Bracket for Linear Rails.
----------------------------------------
----------------------------------------
Just 5 easy to print parts that can be used to mount a Bondtech BMG or clone along with an E3D Volcano hotend to an MGN9H or MGN12H Linear rail.
I use this setup now on my Ender 3's but it could be used on other machines.
I have also provided a drawing with dimensions so that the actual main mount can be cut and drilled out of aluminium.
This is what i did and used 100x50mm Aluminium angle i purchased from ebay for a couple of pounds. It makes for a lot stiffer mount and is pretty straightforward to do with basic tools. You can see it in the pictures.
----------------------------------------
Materials:
4 x M3x8mm Button Head Bolt
6 x M3x12mm Cap Head Bolts
3 x M3x20mm Cap Head Bolt
3 x M3x40mm Cap Head Bolt
1 x M3 Locknut
And That’s it.
----------------------------------------
Printed in Sunlu Filament Black PETG purchased from Amazon.
Nozzle : 0.6
Layers : 0.28
Print Temp : 240°C
Bed Temp : 80°C
Print Speed : 50mm/s
Top Layers : 4
Bottom Layers : 4
Perimeters : 2
Printed on Buildtak.
Date published | 29/08/2019 |