Openbuilds Interface Holder

In order to be functional, additional parts are needed:

4x M4 button head screws 16 mm long,
4x M4 nylon lock nuts,
6x 6 mm dia x 3 mm thick magnets (found here: https://www.amazon.ca/-/fr/gp/product/B07873ZCY4/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1)

Magnets are press-fit into recessed holes. It holds well, easy to pull out if needed to replace.

For the ''Interface_holder_part1'', you need to insert 4x M4 nylon lock nuts at 16,40 height layer. You need to set a pause in the Gcode at this layer in order to put the nuts. I used PrusaSlicer to set the pause to the desired layer.