MMU2 Upgrade CC-RS

3/5/5/25% PETG or ABS 

PTFE connector - https://amzn.to/3HyMm0u

Print upright, narrow side down with 0.2mm. 

Tested in ABS CR3D MagicBlack on Voron V0.1. 

Is intended for the CC-RS https://www.prusaprinters.org/prints/126144-cc-rs-chaoscube-railsystem
Can also be used on other printers with 3030. 

Drawn by Dark_Asylum edited by Chaosdrucker.