Manual reel with brake

Just a simple smal, wall mounted reel.

you need to print:
2x Scheibe
1x Kurbel
1x HalterL and HalterR or HalterL+R
1x Welle
1x ZahnkappeLH or RH. LH if you want to have the Crank on the Lefthand side.
1x Blocker

Scheibe, Kurbel and Zahnkappe must be glued on Welle.
I fixed the Blocker with a wire from a paper clip.

Raft is needed only for Welle

for the crank I used a M6 screw.

Printing Time arround 6h

Print Settings

Rafts:

Yes

Supports:

No

0.2

Infill:

50