V4 Crazy Lime Twisted Dice Tower (12mm or less atm) with 14 Hidden Micro SD Slots

V4 dice tower, lime like lol

Finished the base and put 14 slots for micro sd’s in there. The cover also can be used as a dice stopper as seen in the picture.

CURRENTLY UNTESTED, will print soon but not 100% sure about size.

UPDATE: Currently printing, micro sd seems to fit great. Only thing left to test is if cover goes over it just as well ;D will update after it finishes.

https://www.facebook.com/612732915815905/posts/628536257568904?sfns=mo

UPDATE!!!!!!! I MADE BOOBOO :0 my 16mm dice is too big for the gates (see past pic) Need to increase scale to work. But if i increase scale the micro sd card slots will be too big. After i finish the print i will measure everythijg accurately and updates the model as necessary.

DO NOT PRINT (unless your dice is 12mm or less), wait for my update in the next few days.

I made a 12mm dice in case you already printed before i made changes- https://www.thingiverse.com/thing:3433712

I also added the stl to this make just in case ;0

UPDATE: 20% done and one step almost finished. guess what? :D NO OVERHANG!!!!! YAAAAAAAAAAAAAAAAAAAA!!!!! XD hard work pays off. now to fix that scaling...

UPDATE: 5am and 35% done so i shall be going to bed :) its coming out GREEEEEAT :D althpugh i am slightly worried that the steps might be too far apart? Dice might get stuck. I guess wel see what happens...

UPDATE: 12 hour print :D slicer lied said it was 17, im not pissed lol. https://www.thingiverse.com/make:613268 still need the lid and 12mm dice, ill start that right now.

UPDATE: printed dice and lid, turned out cool :D however.... :/// the 12mm dice gets stuck in the stairs quite often since it was meant for 16mm dice. So i will have to do some work on this. Meaning probably v5 :0

In retrospect, instead of sd slots i should have made dice slots xP i just printed an sd holder before this and i guess it was in my head :0 sowy lol

If I’ve made a positive impact in your life please support me via Paypal ;)

https://paypal.me/drewbrewchan?locale.x=en\_US