Logitech K860 7 degree keyboard foot

If you bring your hand down a little too hard on the corner of these, otherwise great, keyboards you can break the stock larger feet pretty easily. After doing this myself I used the remaining, unbroken, foot to design a new one. I put a recess on the bottom face of the foot so you can move the rubber pad from your broken foot to the new one.

Print Settings

• Layer height: 0.15 or 0.2
• Perimeters: 3
• Infill: I set mine to 100%
  • though the extra perimeter makes the infill largely irrelevant 
• Support: The pegs require support since they hang out into space.
  • In the included 3mf file I have painted on the required supports.