Removable filament holder

This is ment be able to be adapted to any box, just take a length of 1/2 in dowel and cut it to length of the BOTTOM of the box. You are going to need to print 2 of the connectors, one for either side. The 2 extra holes on the bottom are for the legs, which are also 1/2 in dowel. All you need to do for the legs is make sure that the filament will fit in the box, on the dowel and that the legs are half way up from the bottom. Then it should work great!

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3 Pro

Rafts:

Yes

Supports: 

Yes

Resolution:

200

Infill: 

20

Filament: Labists PLA 

How I Designed This

What I did was take 3 cylinders and conjoin them on one point, then I added a little insert that makes sure you can't push the dowel in to far, and also so that it looks like one piece, not one piece with a hole in the rear. Lastly I made holes in the cylinders till they hit my insert so that you could shove the rods on in there and not have them go in to far.

Category: 3D Printer Accessories