Furniture Leg Extension

This is a simple 75mm tall leg extension for my couch. It's designed to work with any tapered leg that has a ~70x70mm end. Secure it in place using a screw.

Let me know if you want a full (original, non-extended height) 125mm tall couch leg.

Printing instructions:

Set your extrusion width to between 0.6-0.62mm

Perimeters: 6

Slicing height: 0.32

You may need to enable overlapping perimeters or mess with the extrusion width a bit to get it to slice optimally.

Ideally this model will slice with all perimeters (except for a bit of infill at the start) & no gap fill.