USB Type C connector for head tube

The model allows the integration of USB type C on your head tube (Ahead system). With 3mm LED based on the charger "Forumlader". For which this mount was designed by Wahoo. Optionally, a model with a Wahoo Element Bolt mount is attached.  Other Wahoo systems have not been tested.

Note: The mount is 9mm high and is only held in place by the end cap.

Tip: If you want to replace a USB-C on an existing USB-A, this can be purchased via a JRC-B008 for a few euros. To operate the USBC socket, it is necessary to apply a voltage to the CC pin (pin on back of PCB) depending on the output current. In my case 1.7V to output 3A from the USB-C socket. I realised this via a voltage divider from the output voltage of 5V.

The Wahoo mount is based on the following:

https://www.thingiverse.com/thing:3752313/files