Sorbothane 1" Hemisphere Adapter Set
Sorbothane 1" Hemisphere Adapter Set
Published 2018-07-09T10:12:29+00:00
These are adapter feet for my Prusa Research i3 MK2S, MK2.5 and MK3 to be used with Isolate It! (Sorbothane) brand 1" damper hemispheres.
Though the widely adopted method of low cost noise reduction is a paving stone, it isn't practical for offsite or demo work for a printer that is inherently meant to be portable.
Notes on the design.
MK2/S Y-corner adapter set comes with one that is modified to fit around the PSU brace. MK2/S Frame set have a slot that must be attached slot-side toward the printer. All adapters are 0.2mm clearance meant to be extremely tight as not to fall off. MK3 set has not been tested, please reach out in comments if you've printed. Adjust to your liking, STEP file provided.
I printed with what I had on hand. For the Y-corner adapters, Prusa Orange PETG with Frame adapters being in ColorFabb HT.
Stock settings in Slic3r Prusa Edition were used but printed solid 0.2mm with supports turned on. Detachable, Support on build plate only ON, XY separation 100%, Don't support bridges OFF.
Date published | 09/07/2018 |
Time to do | - 266 minutes |
Material Quantity | 48.23g |
Dimensions | 77.20 x 112.00 x 19.00 mm |