Lack Enclosure MMU PTFE Hub (Remixed)

A remix of the excellent PTFE Hub for MMUv2S originally designed by Bryan.Smith.Dev - intended to be used with spool rewinders (https://www.thingiverse.com/thing:3781815).

Updated the hub to use threads that fit the BIQU PC4-M10 Straight Passthrough connectors. These are not actually M10 despite the name, they are BSP 1/8 threads. The threads are not entirely pre-formed due to 0.4mm nozzle tolerances, but it does help make threading them in straight easier.

Step and F360 files provided.

The numbers are also redone so that you can print them and snap in place. These by default have 0.1mm tolerance on all sides and should snap in nicely - if you need to adjust it open the Fusion 360 file, update the Tolerance parameter. You can use a larger value if the numbers are too tight, or a smaller value if too loose. I recommend changing it by 0.05mm at a time - remember this value is doubled across the entire dimension of the part due to being applied on both sides of the part.