Samsung Galaxy Tab A2 S t380 case

Originally published here: Samsung Galaxy Tab A2 S t380 case by tato_713 - Thingiverse

Some of the models are designed for rigid materials and others for flexible ones.The models materials are not interchangeable, so pay attention to the file names. If you have any request on the design just ask me.

2021 is the year when most of country started the covid-19 vaccination; that's why I added a design with the 2021 with the "0" as a virus silhouette and the "1" as a syringe.

For other phone cases check this.

Here is the explanation of the files names:

• Flex: made for elastic filaments like TPU. Not tested. 
• Rigid: made for rigid (non-elastic) filaments like PLA, ABS, HIPS, etc. The entire model is a little bigger and the holes for the buttons are opened on the front side. Tested only on PLA. 
• Banded: It has regular horizontal grooves in the bed surface, to make the finished texture more regular, avoiding irregularities on that part, and with a better grip. 
• Portrait: It has a foldable arm that works as a support for the tablet so you can put it as a portrait (vertical or horizontal). Be careful with the hinge after printing, it could get stucked and broke. You must have the retraction settings properly configured. If the hinge is too loose, try using hair spray to increase its friction.

I spend part of my time making these models, letting them available and free for everyone. If you want to support my work, you can contribute with me by donating to this PayPal account.

Print Settings

Rafts:

No

Supports:

Yes

Notes:

If you set the wall width to one filament line (0.4mm) and the infill overlap to higher amount (70~100%) you could have a rough wall surface.