Scraper tool holder for Kaje's scraper printed at 75%

UPDATE 7.1.2022:

• I have reuploaded .3mf and .gcode files for improved wall printing around honeycomb modifier

Scraper holder based on yoons original (thanks!).

It is needed to be remixed for 75% print scale of Kaje's scraper, because the small side part, on which scraper is acually hanging, would be too big (and it could not be hanged), but at the same time, the other parts must have the same XY dimensions (to fit on printer mainframe and the top of PSU).

So I have just scaled this side part to 75% aswell (leaving the main body part at exactly the same XY size).

Also i have made the main body less thick, applied some rounded corners etc.

Scraper size that can be used:

• from 75% of original Kaje scraper and more - also fits for 100% of original scraper (but scraper cannot be smaller than 75%)

Installation:

• designed to not interfere with extruder assembly and x-axis assembly.
• you may need to apply some force to place the bracket onto the mainframe.

Slicing Instruction:

• PLA or PETG (I used Prusa PETG)
• Use modifier box to remove top & bottom layers and add your choice of infill pattern in the middle (refer to 3mf file for reference).
• I have used more infill near the mainframe holder, the rest can be without infill at all or have just some low value like 5%